Call us: +31 (0)78-6778778
Rubberdesign
  • Products
    • Anti-Vibration Mountings
      • MP Mountings
      • Range Anti-Vibration Mountings
      • Steel Spring Isolators
    • AVM Air Spring
      • AVM Products
        • Medium and heavy duty spring isolators
        • Standard Spring Isolators
      • Technical Information
        • Selection curves
        • Isolator selection
      • Installation instruction
    • Engine & Gearbox Mountings
      • Conical Mountings
      • Conical Mountings – approval
      • Sandwich Mountings
      • TT Mountings
      • Gearbox Mountings
        • Torque Compensation System
        • TG Mountings
    • Bellows & Compensators
      • Fabric Compensators
      • Rubber Bellows
      • Stainless Steel Bellows
    • Shock Mountings
      • Cable Mountings
      • Exhaust Shock Mountings
      • Rubber Shock Mountings
    • Exhaust Equipment
      • Fabric Compensators
      • Fire Protection Textile
      • Flexible Suspension
      • Heat Reducing Bulkhead Penetration
      • High Flexible Passage
      • Stainless Steel Bellows
    • Propulsion Equipment
      • Marine Couplings
      • Thrust Bearings
      • Torque Compensation System
      • Compact Thrust block
      • Rubber Design Coupling – RDC
    • Propeller Shaft Installations
    • MecLev ® (Mechanical Levelling)
  • Services
    • After Sales Service
    • Engineering Services
    • Production
    • Measurement & Consultancy
    • Research & Development
    • Vibration measurements & test technology
  • Downloads
    • Anti-Vibration Mountings downloads
    • Bellows & Compensators downloads
    • Cable Mountings Downloads
    • Engine & Gearbox Mountings
    • Exhaust Equipment downloads
    • Propeller Shaft Installations downloads
    • Propulsion Equipment downloads
    • Rubber Bellows downloads
    • Shock Mountings downloads
    • Steel Spring Isolators downloads
  • News
  • About Rubber Design
    • Organisation
    • Markets
    • Mission Statement
    • Privacy Statement
    • ISO 9001 Certificate English
  • Career
  • Agents
  • Contact
  • Search
  • Menu Menu
PreviousNext
1234

Flexible Suspension

Stabilizers / hanging and standing fixed points
The stabilizers are sized and positioned to allow the maximum thermal expansion of the exhaust system between the fixed point in the exhaust and the stainless steel bellows. It is necessary to place the stabilizers at an angle of approx. 90° to flexibly the support of the exhaust piping in the required directions. If necessary, the length of the stabilizer can be reduced by one-third of its length.

The hanging fixed points support the exhaust system and control the dynamic forces which occur in the system while the vessel is in operation. The fixed points control the direction of the thermal expansion within the exhaust system.

The standing fixed points support the exhaust system and control the dynamic forces, which occur in the system while the vessel is in operation. The fixed points control the direction of the thermal expansion within the exhaust system.

  • Anti-Vibration Mountings
    • MP Mountings
    • Range Anti-Vibration Mountings
    • Steel Spring Isolators
    • Steel Spring Isolators
  • Bellows & Compensators
    • Fabric Compensators
    • Rubber Bellows
    • Stainless Steel Bellows
  • Engine & Gearbox Mountings
    • Conical Mountings
    • Conical Mountings – approval
    • Gearbox Mountings
      • TG Mountings
      • Torque Compensation System
      • TT Mountings
    • Sandwich Mountings
  • Exhaust Equipment
    • Fabric Compensators
    • Fire Protection Textile
    • Flexible Suspension
    • Heat Reducing Bulkhead Penetration
    • High Flexible Passage
    • Stainless Steel Bellows
  • MecLev ® (Mechanical Levelling)
  • Propeller Shaft Installations
  • Propulsion Equipment
    • Compact Thrust block
    • Marine Couplings
    • Rubber Design Coupling – RDC
    • Thrust Bearings
    • Torque Compensation System
  • Shock Mountings
    • Cable Mountings
    • Exhaust Shock Mountings
    • Rubber Shock Mountings

Contact us:

Rubber Design B.V.
Industrieweg 21
2995 BE Heerjansdam
The Netherlands
Tel: +31 (0)78-6778778

Postal address:
P.O. Box 15
2995 ZG Heerjansdam
The Netherlands
info@rubberdesign.nl
www.rubberdesign.nl

Products & Services

Anti-Vibration Mountings 
AVM Air Spring
Bellows & Compensators
Engine & Gearbox Mountings
Exhaust Equipment
MecLev ® (Mechanical Levelling)
Propeller Shaft Installations
Propulsion Equipment
Shock Mountings
Services >

Latest News

  • NMT important export partner for Rubber Design30 May 2021 - 08:57
  • Damen and Rubber Design working together on the combat support ship1 April 2021 - 09:56
  • Rubber Design minimize underwater radiated noise from research vesselThe next level in silence for research vessels31 July 2019 - 12:55

Social Media

Visit Us On FacebookVisit Us On LinkedinVisit Us On Instagram
© Copyright - Rubber Design 2021 | Legal Notice | Privacy Statement | Made by Studio Carpe Diem
Scroll to top